Products

SBS

Polystyrene-b-polybutadiene-b-polystyrene triblock copolymer on silicon

Overview

Spin-cast SBS films on Si are useful for learning soft-material imaging and compositional mapping. Soft and hard blocks help visualization in AFM. The guide compares contact mode and AM-PI (tapping) under low- and high-force conditions.

At a glance

MaterialTriblock copolymer SBS (PS-b-PB-b-PS), spin-cast film on Si
Contact mode (guide)Non-destructive imaging requires a soft probe (k < 10 mN/m); height corrugations in the 1–2 nm range are noted
AM-PI usesLow-force imaging for topography; higher force reveals local stiffness/adhesion contrast between components
Primary AFM usesSoft-sample imaging practice; compositional mapping via phase / lateral force

Imaging notes from the guide

  • Phase images often show higher compositional contrast than height images.
  • The guide illustrates how probe stiffness and free/set-point amplitudes change the observed patterns.

Figures and wording on this page summarize the published product guide. For full discussion, figures, and references, download the PDF.

SBS phase image, 1.5 µm, guide Figure 5b
Representative AFM figure crop from the SBS product guide. Scale bars and labels are retained from the source figure where present.
Additional representative figure for SBS
Height (a) and phase (b), 1.5 µm, SBS film in tapping mode at low force (guide Figure 5a–b). The phase image shows the worm-like microphase-separated domains.
Sample-specific AFM reports: if you want a lightly processed image report for the sample you receive, ask when requesting a quote. We will confirm availability for that order.