AFM guidance

Short orientation for choosing a sample. Detailed procedures and figures are in each product guide PDF.

Match the sample to the measurement

  • Phase contrast / hard–soft domains: PS/LDPE is the clearest everyday example in this catalog, with a large room-temperature modulus contrast cited in its guide.
  • PeakForce / local modulus practice: PS/LDPE is described in its guide as handy for elastic-modulus mapping in D-CNT (PeakForce™) mode; PS/PVAC also shows local modulus maps in its guide.
  • Soft polymer & temperature: PDES rubbed films and their phase transitions.
  • Block-copolymer nanostructure: SBS for soft-sample imaging and compositional mapping.
  • Electric modes (KFM / dielectric): PS/PVAC and F14H20 guides include electric-mode examples.

Force matters for phase contrast

Several guides emphasize that gentle imaging (set-point close to free amplitude) may barely differentiate components, while reducing the set-point increases material contrast. Start gently, then increase interaction carefully.

Representative images vs your sample

Website and guide figures show typical morphology. Optical photographs are representative and intended to give an idea of appearance, not to document optical performance. AFM images on this site are cropped from the published guides (or, where noted, from example report figures for PS/LDPE). The plain PS and LDPE images are height scans from SPM Supplies sample measurements.

These materials are sold as microscopy test samples. Do not treat catalog figures or guide text as certified calibration certificates.

Browse products · Request a quote