Products

PS

Polystyrene film on silicon

Overview

A plain polystyrene film on Si, not blended. It gives a smooth, stiff polymer reference surface for nanoindentation and force measurements, and pairs naturally with the LDPE film and the PS/LDPE blend.

At a glance

MaterialAtactic polystyrene (PS) film on Si substrate
Typical modulus (PS/LDPE guide)PS ≈ 3.0 GPa at room temperature
Primary AFM usesNanoindentation and force-curve measurements; stiff-polymer reference for modulus mapping
What this is notNot presented here as a certified calibration standard or traceable hardness/dimension artifact

Notes

  • The film is very flat. In the 5 µm tapping-mode height image shown here, the full colour scale spans only about 1.1 nm, and the RMS roughness is about 0.2 nm after background removal.
  • Use it with the LDPE film to compare a stiff and a soft polymer measured with the same probe.

There is no separate guide for this sample. The PS/LDPE guide covers both polymers, including their moduli and imaging behaviour.

AFM height image of a polystyrene film on silicon, 5 µm scan
Tapping-mode height image of a PS film on Si, 5 µm scan, with background removed. The Z colour scale spans about 1.1 nm, showing how flat the surface is.
Sample-specific AFM reports: if you want a lightly processed image report for the sample you receive, ask when requesting a quote. We will confirm availability for that order.