Products

PS / PVAC

Polystyrene / poly(vinyl acetate) blend

Overview

PS/PVAC is presented as a characteristic sample for AFM electric modes (EFM, KFM, local dielectric / dC/dZ) because PVAC has a larger dipole moment and higher dielectric permittivity than PS. It is also useful for local mechanical contrast and AFM-Raman mapping examples in the guide.

At a glance

MaterialBinary blend of polystyrene and poly(vinyl acetate); guide examples on Si and ITO glass
Electric contrast (guide)PVAC dipole ≈ 2.1 D; static dielectric permittivity roughly 2–3 (PS) vs ~7 (PVAC)
Thermal note (guide)Tg of PVAC ≈ 35 °C; PVAC softens above Tg relative to PS
Primary AFM usesKFM / surface potential, dielectric response, AM-PI morphology, local modulus mapping

Imaging notes from the guide

  • Typical morphology includes raised areas and circular sub-micron “dome” structures assigned to PVAC in the guide.
  • Film thickness on the order of ~30 nm is noted for one preparation, which facilitates electric-response measurements.
  • Methanol vapor swelling of PVAC is mentioned as an additional contrast route.

Figures and wording on this page summarize the published product guide. For full discussion, figures, and references, download the PDF.

Representative AFM image for PS / PVAC
Representative AFM figure crop from the PS / PVAC product guide. Scale bars and labels are retained from the source figure where present.
Additional representative figure for PS / PVAC
Representative AFM height images of a PS/PVAC film from the product guide.
Sample-specific AFM reports: if you want a lightly processed image report for the sample you receive, ask when requesting a quote. We will confirm availability for that order.