Products

LDPE

Low-density polyethylene film on silicon

Overview

A plain low-density polyethylene film on Si, not blended. It gives a soft, semicrystalline polymer reference for nanoindentation and force measurements, and pairs naturally with the PS film and the PS/LDPE blend.

At a glance

MaterialLow-density polyethylene (LDPE) film on Si substrate
Typical modulus (PS/LDPE guide)LDPE ≈ 0.2 GPa at room temperature
Primary AFM usesNanoindentation and force-curve measurements; soft-polymer reference for modulus mapping
What this is notNot presented here as a certified calibration standard or traceable hardness/dimension artifact

Notes

  • LDPE is semicrystalline, and the PS/LDPE guide shows crystalline lamellae in LDPE phase images.
  • Use it with the PS film to compare a soft and a stiff polymer measured with the same probe.

There is no separate guide for this sample. The PS/LDPE guide covers both polymers, including their moduli and imaging behaviour.

AFM height image of a low-density polyethylene film on silicon, 30 µm scan
Tapping-mode height image of an LDPE film on Si, 30 µm scan, with background removed. The Z colour scale spans about 173 nm.
Sample-specific AFM reports: if you want a lightly processed image report for the sample you receive, ask when requesting a quote. We will confirm availability for that order.